Product ID:THERMATEX 000 (02308)
MSDS Date:01/01/1987
FSC:9150
NIIN:00-945-2249
MSDS Number: BFYPY

TEXACO INC

Emergency Phone: 914-831-3400 X406

Cage: 7B131

TEXACO INC

509 BEACON, NY 12508-0509 US

Telephone: 914-831-3400

Cage: 7B131

MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: >95%.

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9192

ALUMINUM SULFATE (SARA III)

CAS: 10043-01-3

RTECS: BD1700000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILICON AS ADDITIVE(ADDITIVES OF SILICON + ALUMINUM ACCOUNT

RTECS: VW1475000

ACGIH TLV: 5 MG/CUM(R-DUST

Effects of Overexposure:EYES/INHAL:BELIEVED TO BE MINIMALLY IRRITATING;
SKIN: SLIGHTLY IRRITATING W/POSSIBLE REDNESS

First Aid:SKIN/EYES: FLUSH EXPOSED AREA W/PLENTY OF WATER. FOR
SKIN,WASH W/SOAP & WATER; INGEST/INHAL: NONE CONSIDERED NECESSARY.

Flash Point:NOT DETERMINED
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,FOAM/CARBON DIOXIDE
Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING; COOL
FIRE-EXPOSED CONTAINR
Unusual Fire/Explosion Hazard:MFR. STATES "NONE"

Spill Release Procedures:CONTAIN SPILL IF POSSIBLE. WIPE UP OR ABSORB
ON SUITABLE MATERIAL & SHOVEL UP.

Handling and Storage Precautions:MINIMUM FEASIBLE HANDLING TEMPERATURES
SHOULD BE MAINTAINED. MINIMIZE PERIODS OF EXPOSURE TO HI-TEMPS.;
AVOID WATER CONTAMINATION.
Other Precautions:FOR SKIN:EXPOSED PARTY SHOULD EXERCISE REASONABLE
PERSONAL CLEANLINESS-THIS INCLUDES CLEANSING EXPOSED SKIN AREAS
SEVERAL TIMES DAILY W/SOAP & WATER, & LAUNDERING/DRY CLEANING
SOILED WORK CLTS

Respiratory Protection:NONE REQ. WHEN PRD. HANDLED @ MINIMUM FEASIBLE
TEMPERATURE.
Ventilation:MAINTAIN AIR QUALITY BELOW TLV FOR GOOD IH PRACTICE
Protective Gloves:AS REQUIRED
Eye Protection:CHEMICAL GOGGLES/F.SHIELD
Other Protective Equipment:AS REQUIRED FOR TASK @ HAND.
Supplemental Safety and Health
MSDS DATE:1/7/83;

HCC:V6
Boiling Pt:B.P. Text:NOT DETERM.
Viscosity:37CST @104F
Appearance and Odor:DARK RED

Stability Indicator/Materials to Avoid:YES
MFR INDICATES NONE
Stability Condition to Avoid:MINIMIZE EXPOSURE TO HI-TEMP, SINCE THIS
WILL SOFTEN GREASE
Hazardous Decomposition Products:CARBON
MONOXIDE,DIOXIDE,ALDEHYDES,KETONES,NO*X & SO*X'S

Waste Disposal Methods:UNDER RCRA,USER MUST DETERMINE @ DISPOSAL
TIME,WHETHER PRODUCT MEETS RCRA CRITERIA. PRODUCT
USES,TRANSFORMATIONS,MIXTURE,PROCESSES,ETC. MAY RENDER THE
RESULTING MATERIAL HAZARDOUS; PRODUCT,IF DISCARDE D IN ITS
PURCHASED FORM, NOT A RCRA HAZ. WASTE

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.